Skid Mounted Horizontal Oil Gas Fired Industrial Thermal Oil, Thermic Fluid, Thermal Fluid, Hot Oil, Thermo Oil Boiler, Heater with China or ASME Standard

Overview

Basic Info.

Model NO.	YYW
Manufacturing Level	A
Burning Style	Chamber Combustion Boiler
Usage	Industrial
Oil Circualtion	Forced Circualtion
Oil Pressure	Low Pressure
Transport Package	Seaworthy Exportable Packing
Specification	Heating capacity: 0.6 -1.3million kcal/hr
Trademark	sutex boiler
Origin	China
HS Code	84021200
Production Capacity	1200 Set Per Year

Product Description

Product Description

Skid Mounted Horizontal Oil Gas Fired Industrial Thermal Oil,Thermic fluid,Thermal Fluid,Hot Oil,
Thermo Oil Boiler,Heater with China or ASME Standard
Heating power: 700-1500kWHeating capacity: 600,000-1,300,000 kcal/hrDesign pressure: 11 barMax. Working Temp: 320 degree C.Schematic Diagram

Our Advantages

Advantages of Skid Mounted Thermal Oil Boiler/ HeaterPoint-of-UseUsing smaller, but more mobile, thermal oil boiler/heaters resolve this problem. Skid mounted thermal oil boiler/heaters allow for positioning directly at the point-of-use. As a result, there is minimal energy loss and maximum efficiency.VersatilitySkid mounted thermal oil boiler/heaters can meet the changing needs of facility processes without the need for expensive installations. As well, these boiler/heaters can address heating requirements. Just because heating requirements change, doesn't necessarily mean the heaters have to change as well.SizeSkid boiler/heaters take up less space, allowing more room for operations and other projects.Skid-mounted boilers/heaters are the ideal solution when the biggest job site concern is space. This packaged system on a single skid allows for maximum output from the smallest footprint. This solution is typically best for tight locations with at least some covering structure already in placeReduce cost and Installation Lower your project planning costs, reduce installation cost, and increase your return on investment with a pre-packaged system. Single point piping and electrical connections significantly reduce the amount of installation time. All major components and piping are pre-assembled eliminating the potential for improper assembly and installation troubleshooting.

Product Parameters

Model	YYL(W)-700Y,Q	YYL(W)-900Y,Q	YYL(W)-1200Y,Q	YYL(W)-1500Y,Q
Heating Power(kW)	700	900	1200	1500
Heating Capacityx104(kCal/h)	60	75	100	130
Design Thermal Efficiency(Oil)(%)	≥90	≥90	≥90	≥90
Design Thermal Efficiency(Natural gas)(%)	≥92	≥92	≥92	≥92
Design Pressure(Mpa)	1.1	1.1	1.1	1.1
Max. Working Temp.(ºC)	320	320	320	320
Medium Circulation Flow(m3/h)	60	100	100	100
Thermal Oil Capacity in Proper(m3)	0.7	0.7	0.8	0.95
Oil Outlet/Inlet Dia.(DN)	100	125	125	125
Installation Power(kW)	23	30	40	42
Design Fuel	Oil, Natural Gas	Oil, Natural Gas	Oil, Natural Gas	Oil, Natural Gas
Fuel Consumption: kg/hr/Nm3/h (OIL/ Natural gas)	65.3/77	84/99	112/132	140/165
Boiler Overall DimensionHorizontal Type LxWxH(m)	3.15X1.95X1.84	3.6X2.1X2	4.05X2.13X2.07	4.4X2.15X2.13

Main Parts Processing

Company Profile

About US
Jiangsu soho Honry Imp. &Exp. Co., Ltd is a state-owned company, which hold SUTEX BOILER brand, and select the boiler maker as our ODM, which is a professional manufacturing company, founded in 1991, for boiler and pressure vessel processing, with more than 500 workers and 150 technical engineers. It holds S and U stamps of ASME Standards, Class-A boiler manufacturing license, D1,D2 pressure vessel manufacturing license, boiler & pressure vessel inspection certificate of China.
It has developed a series of progress technologies in the field of manufacturing of boiler pressure vessel with more than 30 years technical accumulation and innovation. It has more than 100 invention patents and utility model patents in such area of boiler combustion. Our boiler products cover power plant boiler, steam boiler, hot water boiler, thermal oil heater, waste heat recovery steam boiler, steam generator, etc.
Products are widely used in power generation, biomass, electric heating, chemical industry, textile industry, food industry, paper industry, pavement, plastics, rubber, and wood industry, etc. Until now, there are more than ten thousand clients all over the world. Our products are not only served in China, but also exported to such countries/regions as USA, Japan, Australia, Russia, Vietnam, Philippine, Malaysia, Indonesia, Pakistan, Kazakhstan, Iran, Egypt, and Africa, etc.
Workshop View

Ceritificate

Overseas Exhibition

After Sales Service

SUTEX offers its customers the following services for industrial steam/hot water boiler, thermal oil boile/heater and waste heat recovery boilers and steam generators:Customized boiler designs.Super quality boiler productInstallation and commissioning serviceOperators training serviceLifetime maintenance service.Clients be all over the world

Field Installation&Commission

Thermal Oil Boiler FAQsQ: What different types of boilers are available?DZL type steam/hot water boilerSZL type steam /hot water boilerSHL type steam /hot water boilerWNS type steam /hot water boilerSZS type steam /hot water boilerSZW type steam /hot water boilerCFB type steam boilerYLW type thermal oil boiler/heaterYYL(W) type thermal oil boiler/heaterWNS type thermal oil boiler/heaterSZS type thermal oil boiler/heaterSZW type thermal oil boiler/heaterWaste heat recovery boilerSteam generatorQ: What's advantages of SUTEX Thermal oil boiler?Customized Boiler Design SolutionsSpecializing in the design of high-quality hot oil heaters and heating systemsCustomized design for fuel feeding, ash and slag removing and exhaust flue gas emission treatment system. High Thermal Efficiencya unique serpentine coil design that provides many benefits over a typical helical coil heater, including:even heat distributionless oil degradationlonger tube lifehigher operating oil temperatureeasy maintenancelonger-lasting compared to our competitionUnique Control SystemUnique PID unit design with covered PLC and HMI to reach high level automatic running of boiler Q: How do I choose the right boiler?Firstly, check the actual heat consumption required at present, and discuss with management there are extra heat required or not in next five years.Secondly, confirm the boiler fuel type, then SUTEX will provide you an optimal boiler that take all factors in consideration
Q: Can thermal fluids/oil be mixed?Mixing different fluids and subjecting them to high temperatures can have unpredictable results. In addition, once fluids have been mixed, the baseline analysis of the fluid is no longer applicable making it difficult to perform an annual analysis of the fluid for degradation
Q: Is there a minimum flow requirement for a thermal oil boiler?A minimum flow rate is required in order to maintain the appropriate velocities through the boiler/heater. If the velocity is too low the film temperature could increase, potentially destroying the fluid and damaging coil tube
Q: What is a nitrogen protection?When an expansion tank is pressurized with nitrogen (to eliminate the possibility of exposure of the fluid to oxygen), it is said to have a nitrogen protection
Q: How long does an industrial thermal oil boiler last?The normal service life of a thermal oil boiler is 10 to 20 years, provided that proper care and maintenance routines are applied to the thermal oil and interior of the boiler.When considering steam boiler replacement, the three most important aspects to consider are safety, economy and changing requirements to perform the function for which it is operating
Q: What services for industrial boilers does SUTEX offer?SUTEX offers its customers the following services for industrial thermal boiler, thermal oil boiler and waste heat recovery boilers and steam generators:Customized boiler designs.Super quality boiler productInstallation and commissioning serviceOperators training serviceLifetime maintenance service
Q: What safety features do thermal oil boiler have?Boiler shutdown protection due to oil outlet temp. highBoiler shutdown protection due to oil coil temp. highBoiler shutdown protection due to oil outlet pressure highBoiler shutdown protection due to oil inlet pressure. highBoiler shutdown protection due to oil inlet&outlet pressure differ. highBoiler shutdown protection due to oil flow lowBoiler shutdown protection due to low oil level of expansion tankBoiler shutdown protection due to WHRB steam pressure highQ: What is the lead time of SUTEX boilerThe subject boiler will be delivered within 60 -90 days based on boiler capacityQ: What primary components for boilers are there?The most common accessories are:BurnerAir pre-heater Oil circulation pumpExpansion tankCollection tankChimneyControl panelInstrument gauges and valvesSUTEX supplies all types of complementary equipment for industrial thermal oil boilers, and designs new equipment and tools if they are necessary for the final installation to meet its clients' expectations
Q: What are the optional items of boiler for buyer choose fromOil flow meterWaste heat recovery boiler (WHRB)Steam generatorValves installed in oil pipingQ: What is the supply scope of boiler arranged by buyerWhole civil works engineering by SUTEX design drawingAll connecting piping (oil, feed water piping)All connecting cables (motor cables, single cables, main power supply cable)Some connecting valves in oil/feed water pipingBalance flue gas ducting manufacture on site by SUTEX design drawing(if necessary)Q: How does boiler warranty work?The subject boiler is covered by a twelve months warranty against mechanical and/ or factory defects from date of test-run or 18 months from the date of shipment whichever comes earlier. SUTEX shall repair or replace the components, parts or accessories covered by warranty that had become inoperative within the warranty period but not covered caused by faulty operation from the buyer.SUTEX will provide lifetime service for boiler with cost when its warranty expired
Q: Who will be fitting my new boiler?Simply, a local professional boiler installing company will install the subject boiler under SUTEX engineer's instruction and supervisionQ: How long will my installation & commissioning take?Typically, the whole installation & commissioning work may take 1-4 months based on the subject boiler capacity
Q: How often should I maintain my boiler?Overhaul inspection and maintenance: 1-3 monthSUTEX will provide detail brochure regarding how and when to do maintenance work during boiler running.